A & K ENTERPRISES
livesteamsupplies.com
LIVE STEAM WATER HARD TREATMENT
Any comments regarding this site? Please e-mail
aksteamtech@yahoo.com
No material may be reproduced in part or in whole without written consent from holders.
Last update: Sun, 19 Jul 2009 11:08:39
LIVE STEAM HARD WATER TREATMENT FOR SMALL SCALE TO FULL SIZE
THIS IS FOR OUR LIVE STEAM CUSTOMERS WHO NEED AN AFFORDABLE AND RELIABLE WATER TREATMENT SUPPLIER. WE HAVE OVER 30 YEARS OF LIVE STEAM AND POWER BOILER WATER TREATMENT EXPERIENCE TO BACK OUR PRODUCTS.
Brand New from our Plant
This is our line of water treatment specifically blended for hard water for the live steam community. This product is shipped free in the lower 48 states only and can not be combined with any other items unless they are water treatment products. Our line of water treatment products may only be shipped UPS to the lower 48 states. If you are in Alaska, Hawaii or Canada please contact us for a shipping quote.
This includes:
Two containers that total over 80 ounces of (over 40 ounces each container) our RWBT1 in powder form. RWBT1 has added hard water softening agents to hold scale forming hardness in suspension.
Complete instructions and MSDS's
REGULAR PRICE IS $38.54
INSTRUCTIONS FOR RWBT1
RAW WATER BOILER TREATMENT POWDER
For use with Well or River water from your local City Water Supply or Rural Water Systems.
Sulfite test will do for both products as a control for internal boiler water samples once they are up and running. Roughly 30-60 ppm sulfite at start for boiler and tender or 50-200 ppm sodium sulfite residual in a cycled boiler would be great. We can provide custom private labeled test kits for such. Color observation is much simpler but the testing may help you develop a feel for the dosage/color. A light tea color will develop in the boiler water is the target roughly. Adjust your boiler water level roughly 30-60 ppm sulfite at start up or 50-200 ppm sodium sulfite for a cycled boiler residual at end of run. Test ph of the boiler water after adjusting initial sulfite levels and adjust to 9.0 if necessary on steel boilers at start up with BT100 or TSP or Soda Ash if needed. Standard Litmus paper will work well for this. Test ph of the boiler water after adjusting initial sulfite levels and adjust to 8.0 if necessary on steel boilers with copper tubes at start up with BT100 or TSP or Soda Ash if needed. When at the end of run test boiler ph and sulfite residual. On an all steel boiler you should never exceed a ph of 12.0. While running during the day ad a touch of treatment to the tender to maintain a residual every time you take on water as a residual of 10 ppm Sulfite or so works well in the tender. On filling the tender ad an ounce by weight and fill with water and then test residual. Use more or less as needed. When at the end of run test boiler ph and sulfite residual. On an all steel boiler with copper tubes you should never exceed a ph of 9.0. On an all steel boiler with steel tubes you should never exceed a ph of 12.0. 1 to 2 pounds will treat 1000 gallons of softened water. That would equate to 1 1/2 to 3 ounces by weight for 100 gallons of softened water. You may also control to recommended ph as a control factor. Remember these products are concentrated and the recommended doses are most likely less or more depending on your water quality. Dissolve two ounces or two scoops of RWBT1 in the mix bucket while stirring vigorously (while wearing safety goggles) with a ½ gallon of water. Do the same for the boiler fill and any undissolved alkalinity boosters left let stand in an inch of make up water until dissolved in the mix bucket or jar.
SUGGESTED PARAMETERS FOR LIVE STEAM BOILERS
Standard Industrial Guidelines All Steel Boiler water chemistry recommendations 0 to 300 psig:
Ph: 9.0 to 12.0 (less than 8.5 will cause acid wasting of metal)
Conductivity max: 3500 umhos
Sulfite residual: 50 to 200 ppm
Silica max: 150 ppm
Total Hardness: <10 ppm less the better
(RWBT1 should reduce your hardness level to "0" on a steaming boiler if treated correctly)
Dissolved O2 ppm: Trace as it causes pitting
Dissolved Iron: <5 ppm Fe+2 and Fe+3
Please read all MSDS and follow all safety guide lines. Please wear eye protection, dust mask, rubber gloves and rubber apron for personal protection.
THIS IS FOR OUR LIVE STEAM CUSTOMERS WHO NEED AN AFFORDABLE AND RELIABLE WATER TREATMENT SUPPLIER. WE HAVE OVER 30 YEARS OF LIVE STEAM AND POWER BOILER WATER TREATMENT EXPERIENCE TO BACK OUR PRODUCTS.
Brand New from our Plant
This is our line of water treatment specifically blended for hard water for the live steam community. This product is shipped free in the lower 48 states only and can not be combined with any other items unless they are water treatment products. Our line of water treatment products may only be shipped UPS to the lower 48 states. If you are in Alaska, Hawaii or Canada please contact us for a shipping quote.
This includes:
Two containers that total over 80 ounces of (over 40 ounces each container) our RWBT1 in powder form. RWBT1 has added hard water softening agents to hold scale forming hardness in suspension.
Complete instructions and MSDS's
REGULAR PRICE IS $38.54
INSTRUCTIONS FOR RWBT1
RAW WATER BOILER TREATMENT POWDER
For use with Well or River water from your local City Water Supply or Rural Water Systems.
Sulfite test will do for both products as a control for internal boiler water samples once they are up and running. Roughly 30-60 ppm sulfite at start for boiler and tender or 50-200 ppm sodium sulfite residual in a cycled boiler would be great. We can provide custom private labeled test kits for such. Color observation is much simpler but the testing may help you develop a feel for the dosage/color. A light tea color will develop in the boiler water is the target roughly. Adjust your boiler water level roughly 30-60 ppm sulfite at start up or 50-200 ppm sodium sulfite for a cycled boiler residual at end of run. Test ph of the boiler water after adjusting initial sulfite levels and adjust to 9.0 if necessary on steel boilers at start up with BT100 or TSP or Soda Ash if needed. Standard Litmus paper will work well for this. Test ph of the boiler water after adjusting initial sulfite levels and adjust to 8.0 if necessary on steel boilers with copper tubes at start up with BT100 or TSP or Soda Ash if needed. When at the end of run test boiler ph and sulfite residual. On an all steel boiler you should never exceed a ph of 12.0. While running during the day ad a touch of treatment to the tender to maintain a residual every time you take on water as a residual of 10 ppm Sulfite or so works well in the tender. On filling the tender ad an ounce by weight and fill with water and then test residual. Use more or less as needed. When at the end of run test boiler ph and sulfite residual. On an all steel boiler with copper tubes you should never exceed a ph of 9.0. On an all steel boiler with steel tubes you should never exceed a ph of 12.0. 1 to 2 pounds will treat 1000 gallons of softened water. That would equate to 1 1/2 to 3 ounces by weight for 100 gallons of softened water. You may also control to recommended ph as a control factor. Remember these products are concentrated and the recommended doses are most likely less or more depending on your water quality. Dissolve two ounces or two scoops of RWBT1 in the mix bucket while stirring vigorously (while wearing safety goggles) with a ½ gallon of water. Do the same for the boiler fill and any undissolved alkalinity boosters left let stand in an inch of make up water until dissolved in the mix bucket or jar.
SUGGESTED PARAMETERS FOR LIVE STEAM BOILERS
Standard Industrial Guidelines All Steel Boiler water chemistry recommendations 0 to 300 psig:
Ph: 9.0 to 12.0 (less than 8.5 will cause acid wasting of metal)
Conductivity max: 3500 umhos
Sulfite residual: 50 to 200 ppm
Silica max: 150 ppm
Total Hardness: <10 ppm less the better
(RWBT1 should reduce your hardness level to "0" on a steaming boiler if treated correctly)
Dissolved O2 ppm: Trace as it causes pitting
Dissolved Iron: <5 ppm Fe+2 and Fe+3
Please read all MSDS and follow all safety guide lines. Please wear eye protection, dust mask, rubber gloves and rubber apron for personal protection.
WE THANK YOU AND APPRECIATE YOUR BUSINESS!
