BRASS PROPANE BURNER WITH 1/8 INCH NTP BASE WITH WIRE DISRUPTOR
"GREAT FOR PROTOTYPING"
Features:
Precision machined with minimum gas nozzle port which may be increased from #77 to #60.
Set up for Propane Gas
Maximum flame height from tip is 4" to 11" from minimum to maximum heat loading
2500 to 10720 BTU range depending on gas orifice size and supply pressure
Inlet Size 1/8 NPT
The Orifice Diameter is 0.018"
Approximate Dimensions Height 2 3/8" and width is 1/4"
$14.50 each

BRASS PROPANE BURNER WITH 1/8 INCH NTP BASE
"GREAT FOR PROTOTYPING"
Features:
Precision machined with minimum gas nozzle port which may be increased from #77 to #60.
Set up for Propane Gas
Maximum flame height from tip is 12"
You may machine your own cap for this one
2500 to 3500 BTU range depending on gas orifice size
Inlet Size 1/8 NPT
The Orifice Diameter is 0.018"
Approximate Dimensions Height 1 5/8" and width is 1/4"
$9.50 each