Steam Cylinder Oil
We have High Quality Steam Cylinder Oil from Pennsylvania Crude Oil. We have used this Product from Table Top, Small and Large Marine, Steam Tractors, Steam Pumps, 15” Gauge Cagney and Several 2’ Gauge Crowns. We have used this Product with 0 to 350 PSIG Steam and 50 to 100 Degrees Superheat with No Carburizing. This Oil is slightly thinner than those found on the market. The Original formulas were designed for heated and pressurized Displacement Feed Lubricators not Mechanical. We still recommend you Pre Heat the Oil and run a Small Steam Line to the Lubricator and crack some steam in to warm the Oil up. This Oil is approximately 150 Weight and pre-heat is less. This will help thin the Oil to allow easier Pumping and help keep your Lubricator Primed. We have spent years trying everyone’s Steam Cylinder and Valve Oil and this is about the best Product we have found. Any questions or comments please contact us. This is a lower viscosity oil for Small Mechanical Lubricators.
Only $8.00 for a 16 Ounce Bottle
Valve and Steam Cylinder Oil Made from the Highest Quality Pennsylvania Crude Oil
Only $8.00 for a 16 Ounce Bottle
This is a lighter weight steam cylinder oil. A number of products out there are good yet are 500 to 600 weight and impossible to pump. Our product is far easier to pump and allows a complete sheen or coating of internal parts. This product may only be shipped in the Continental USA via UPS. Please feel free to contact us if you have any questions.