A & K ENTERPRISES
livesteamsupplies.com
BOILER BLOW DOWN VALVES
Model 226UT Slow Opening Y-Blow Off Valve
Complies with MSS-SP-80-97
200 WSP at 406° Max
400 WOG
Non-Shock Service
100% Pressure Tested
Threaded Ends
Rising Stem
Swivel Disc Holder
PTFE Disc
Integral Seat
*Contains lead. Not for use in water systems intended for human consumption*
Care must be taken in blow off piping so that no water hammer effect causes shock to the “Y” blow off valve, especially in cases where a boiler has two blow down lines. In such cases both lines should be piped to a common set of blow down valves or each blow off line should be piped separately to the blow down separator. Excessive water hammer or shock can destroy valves and piping and could cause injury.
Factory Prices plus Tax and Shipping & Handling are as follows:
1" $222.42 each
1 1/4" $276.60 each
1 1/2" $360.78 each
2" $515.84 each
Complies with MSS-SP-80-97
200 WSP at 406° Max
400 WOG
Non-Shock Service
100% Pressure Tested
Threaded Ends
Rising Stem
Swivel Disc Holder
PTFE Disc
Integral Seat
*Contains lead. Not for use in water systems intended for human consumption*
Care must be taken in blow off piping so that no water hammer effect causes shock to the “Y” blow off valve, especially in cases where a boiler has two blow down lines. In such cases both lines should be piped to a common set of blow down valves or each blow off line should be piped separately to the blow down separator. Excessive water hammer or shock can destroy valves and piping and could cause injury.
Factory Prices plus Tax and Shipping & Handling are as follows:
1" $222.42 each
1 1/4" $276.60 each
1 1/2" $360.78 each
2" $515.84 each
Model 325U Slow Opening Y-Blow Off Valve
Complies with MSS-SP-80-97
300 WSP
600 WOG
Non-Shock Service
100% Pressure Tested
Threaded Ends
Rising Stem
Swivel Disc Holder
Seat & Disc 400-500 Brinell Stainless Steel
Care must be taken in blow off piping so that no water hammer effect causes shock to the “Y” blow off valve, especially in cases where a boiler has two blow-off lines. In such cases both lines should be piped to a common set of blow off valves or each blow off line should be piped separately to the blow down separator. Excessive water hammer or shock can destroy valves and piping and could cause injury.
Factory Prices plus Tax and Shipping & Handling are as follows:
1" $362.64 each
1 1/4" $477.28 each
1 1/2" $508.80 each
2" $817.54 each
Complies with MSS-SP-80-97
300 WSP
600 WOG
Non-Shock Service
100% Pressure Tested
Threaded Ends
Rising Stem
Swivel Disc Holder
Seat & Disc 400-500 Brinell Stainless Steel
Care must be taken in blow off piping so that no water hammer effect causes shock to the “Y” blow off valve, especially in cases where a boiler has two blow-off lines. In such cases both lines should be piped to a common set of blow off valves or each blow off line should be piped separately to the blow down separator. Excessive water hammer or shock can destroy valves and piping and could cause injury.
Factory Prices plus Tax and Shipping & Handling are as follows:
1" $362.64 each
1 1/4" $477.28 each
1 1/2" $508.80 each
2" $817.54 each
Any comments regarding this site? Please e-mail
No material may be reproduced in part or in whole without written consent from holders.
Last update: Sun, 19 Jul 2009 11:08:39
aksteamtech@yahoo.com
Call the Sales Desk at 661-236-4545 to place an order. Local delivery is also available in the Santa Clarita Valley and surrounding
areas.
Full Steam Plant Engineering and Support with all of our Products offered as well as Factory Support.